Home | Business
Insulation is a low thermal conductivity material that is used to separate the internal climate and sounds from the external climate and sounds. To keep the environment clean and free of harsh chemicals, cellulose insulation is plant fiber used in the wall and roof cavities, this helps to separate the inside and outside of the building, with both thermal and sound. There are four types of cellulose insulation that have been developed over the years. However, insulation is still an industrial need, so each one does have a different use than the other and each one may be used in different parts of the building. The four types include: Dry cellulose which is used when an older home gets new insulation. This is done by blowing the insulation in to holes that are made at the top of the wall. The type of the insulation may also be used in new wall construction by using a netting that has been clamped in place so the insulation my be sprayed. The netting is then removed once the insulation has reached the appropriate density. Spray applied cellulose is another type of this insulation. This is used in new wall constructions. The difference between the dry cellulose and the spray applied, or wet spray, is the water that is added to the cellulose while spraying. In some cases, an adhesive may also need to be added. Wet spray allows the insulation to applied without using a netting or a retainer. Next is stabilized cellulose that is most often used in the attic and roof. A small amount of water is needed to activate the adhesive. The addition of an adhesive will reduce the amount of cellulose that is needed for the job. Lastly is the low dust cellulose insulation. When installing most types of insulation there are usually dust clouds in the area, with cellulose insulation, there are few risks of dust. Although there will be some dust from the paper in the insulation, you may want to wear a simple dust mask to keep from inhaling the dust, but there are no dangers once the insulation is installed and closed off. In fact, you would never know it was cellulose insulation unless you went looking for it. There are advantages to using cellulose insulation such as thermal performance, energy savings, sound insulation, mold and pest control, fire retardation, and vapor barriers. Although, saving money on your energy bills, blocking out the unwanted sounds, helping to get rid of the mold and pests, there are some disadvantages that come along with this type of insulation. The disadvantages include finding someone who is licensed and knowledgeable in your area, the time it will take for the insulation to dry which means down time for your business, and the possible infestation of termites. Termites thrive on cellulose so it will be hard to avoid the infestation. However, with these few disadvantages and a whole list of advantages, it may be worth the trouble to find someone that can install this insulation in your home or office. Cellulose insulation is environmentally friendly because it is made up of recycled newspaper and the boric acid used for fire retardation is as harmless as table salt. So this may be something you want to learn more about if you are planning to have your home or office renovated.
Article Source: http://articles-mart.com
corrosionandthermalsolutions.com
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
